High Torque Disk Coupling
SHD Series

  • Why Couplings?
  • Installation Guide
  • Selection Guide
  • Customer-friendly Services
  • Environmental Compliance
  • Made-To-Order Process
  • Varieties for Special Environments
  • Balancing Correction

SHD Series

Go to SHD Series(Index)

Single Disk High Torque Disk Coupling

  • SHD – 2D (.dwg)
  • SHD – 3D (.step)

Set-Screw

Drawings and photographs of flange shapes
Size (OD) 55 66 88 110
Flange-shaped < ID 22mm < ID 26mm < ID 32mm < ID 48mm

• Only flange-shaped products are available for OD126 and OD144

Drawings and photographs of Cylinder shapes
Size (OD) 55 66 88 110
Cylinder-shaped ≥ ID 22mm ≥ ID 26mm ≥ ID 32mm ≥ ID 48mm
Dimensions / Performance
Model CAD Size (±0.3mm) Screw Rated
Torque
(N·m)
Max.
Torque
(N·m)
Max.
rpm
(min-1)
Moment
of
Inertia
(kg·m2)
Static
Torsional
Stiffness
(N·m/rad)
Mass
(g)
Permissible Misalignment
D D1 D2 L L1 F Size Fastening
Torque
(N·m)
Angular
(˚)
Parallel
(mm)
End-
play
(mm)
SHDS-56 56 30.6 39 44.2 19.5 6.5 M6 7 35 70 7,700 2.9×10-5 2.0×104 150 0.7 0.02 ±0.3
SHDS-66 66 35.6 46 56.5 24.5 7.5 M8 15 60 120 7,000 8.0×10-5 3.0×104 300 0.7 0.02 ±0.3
SHDS-88 88 46 63 69.9 30 9.5 M8 15 180 360 5,500 2.9×10-4 7.0×104 600 0.7 0.02 ±0.3
SHDS-110 108 60.5 77 77.7 34.5 13 M10 30 280 560 4,000 2.0×10-3 1.4×105 1,190 0.7 0.02 ±0.5
SHDS-126 126 65 78/*92 91.2 40 12 M10 30 360 720 3,500 4.4×10-3 4.4×105 3,200 1 0.02 ±1.6
SHDS-144 144 75 88/*104 101.7 45 15 M10 30 530 1,060 3,000 8.4×10-3 7.8×105 4,700 1 0.02 ±1.8
  • The Moment of Inertia and Mass values are based on products with max. Inner diameter.
  • Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft. (Set-screw type is usually less durable than other clamping method, thus please consider it has a complementary option e.g. keyway along with.)
  • OD 126 & 144: Please refer to * marked values for D2 when ID is over 55mm (OD126) and 66mm(OD144)
Standard Inner Diameter (ID)
Model Standard Inner Diameter (d1, d2) (mm)
10 11 12 14 15 16 18 19 20 22 24 25 26 28 30 32 35 38 40 42 45 48 50 55 60 65 70
SHDS-56
SHDS-66
SHDS-88
SHDS-110
SHDS-126
SHDS-144
  • The recommended shaft tolerance is h7.
  • Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
  • Keyway is available. (Optional)