Set-screw
Dimensions / Performance
SOH-(no mark)
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Please modify rated/max. torque value with temperature correction factor when it’s higher than 30°C.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft. (Set-screw type is usually less durable than other clamping method, thus please consider it has a complementary option e.g. keyway along with.)
SOH-S
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Please modify rated/max. torque value with temperature correction factor when it’s higher than 30°C.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft. (Set-screw type is usually less durable than other clamping method, thus please consider it has a complementary option e.g. keyway along with.)
SOH-SS
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Please modify rated/max. torque value with temperature correction factor when it’s higher than 30°C.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft. (Set-screw type is usually less durable than other clamping method, thus please consider it has a complementary option e.g. keyway along with.)
Standard Inner Diameter (ID)
Model | Standard Inner Diameter (d1, d2) (mm) | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 1.5 | 2 | 2.5 | 3 | 4 | 4.5 | 5 | 6 | 6.35 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | |
SOH-6□□ | ● | ● | ● | |||||||||||||||
SOH-8□□ | ● | ● | ● | ● | ||||||||||||||
SOH-10□□ | ● | ● | ● | |||||||||||||||
SOH-12□□ | ● | ● | ● | ● | ||||||||||||||
SOH-16□□ | ● | ● | ● | ● | ||||||||||||||
SOH-20□□ | ● | ● | ● | ● | ● | |||||||||||||
SOH-25□□ | ● | ● | ● | ● | ● | ● | ● | |||||||||||
SOH-32□□ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
Model | Standard Inner Diameter (d1, d2) (mm) | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 25.4 | 28 | 30 | 32 | 35 | |
SOH-43□□ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||||
SOH-53□□ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||
SOH-57□□ | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||||
SOH-70 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
- The recommended shaft tolerance is h7.
- Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
- Keyway is available. (Optional)