Set-screw
Dimensions / Performance
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft. (Set-screw type is usually less durable than other clamping method, thus please consider it has a complementary option e.g. keyway along with.)
Standard Inner Diameter (ID)
Model | Standard Inner Diameter (d1, d2) (mm) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 5 | 6 | 8 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 24 | |
SRG-16 | ● | ● | ● | ● | |||||||||||
SRG-20 | ● | ● | ● | ● | ● | ||||||||||
SRG-25 | ● | ● | ● | ● | ● | ● | |||||||||
SRG-32 | ● | ● | ● | ● | ● | ● | ● | ||||||||
SRG-43 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||
SRG-53 | ● | ● | ● | ● | ● | ● | ● | ● |
- The recommended shaft tolerance is h7.
- Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
- Keyway is available. (Optional)