Dimensions / Performance

Model d X D	CAD	Size (mm)		Initial Clamping Force Ppre-load (N)	W* (mm)				Pressure Flange		Surface Pressure (Mpa)		Mass (g)
		L1	L		1 set	2 set	3 set	4 set	d1	D1	Shaft (Pi)	Hub (Po)
SAPL-R-6 x 9		3.7	4.5	8400	2.5	2.5	3	4	6.1	8.9	115	75	2
SAPL-R-7 x 10		3.7	4.5	8200	2.5	2.5	3	4	7.1	9.9	105	70	2
SAPL-R-8 x 11		3.7	4.5	7700	2.5	2.5	3	4	8.1	10.9	120	90	2
SAPL-R-9 x 12		3.7	4.5	7650	2.5	2.5	3	4	9.1	11.9	140	105	2
SAPL-R-10 x 13		3.7	4.5	7000	2.5	2.5	3	4	10.1	12.9	135	105	2
SAPL-R-11 x 14		3.7	4.5	7000	2.5	2.5	3	4	11.1	13.9	115	90	2
SAPL-R-12 x 15		3.7	4.5	7000	2.5	2.5	3	4	12.1	14.9	115	90	2
SAPL-R-13 x 16		3.7	4.5	6500	2.5	2.5	3	4	13.1	15.9	110	90	2
SAPL-R-14 x 18		5.3	6.3	11000	3.5	3.5	4.5	5.5	14.1	17.9	115	85	5
SAPL-R-15 x 19		5.3	6.3	10800	3.5	3.5	4.5	5.5	15.1	18.9	110	85	5
SAPL-R-16 x 20		5.3	6.3	10000	3.5	3.5	4.5	5.5	16.1	19.9	105	85	6
SAPL-R-17 x 21		5.3	6.3	9600	3.5	3.5	4.5	5.5	17.1	20.9	105	80	6
SAPL-R-18 x 22		5.3	6.3	9150	3.5	3.5	4.5	5.5	18.1	21.9	100	110	7
SAPL-R-19 x 24		5.3	6.3	12500	3.5	3.5	4.5	5.5	19.2	23.8	140	105	7
SAPL-R-20 x 25		5.3	6.3	12000	3.5	3.5	4.5	5.5	20.2	24.8	135	115	9
SAPL-R-22 x 26		5.3	6.3	9000	3.5	3.5	4.5	5.5	22.2	25.8	135	110	7
SAPL-R-24 x 28		5.3	6.3	8400	3.5	3.5	4.5	5.5	24.2	27.8	130	95	8
SAPL-R-25 x 30		5.3	6.3	10000	3.5	3.5	4.5	5.5	25.2	29.8	115	100	9
SAPL-R-28 x 32		5.3	6.3	7500	3.5	3.5	4.5	5.5	28.2	31.8	115	85	10
SAPL-R-30 x 35		5.3	6.3	8600	3.5	3.5	4.5	5.5	30.2	34.8	100	115	11
SAPL-R-32 x 36		5.3	6.3	7900	3.5	3.5	4.5	5.5	32.2	35.8	130	110	11
SAPL-R-35 x 40		6	7	10000	3.5	3.5	4.5	5.5	35.2	39.8	125	100	16
SAPL-R-36 x 42		6	7	11700	3.5	3.5	4.5	5.5	36.2	41.8	115	95	19
SAPL-R-38 x 44		6	7	11000	3.5	3.5	4.5	5.5	38.2	43.8	110	105	21
SAPL-R-40 x 45		6.6	8	13900	3.5	4.5	5.5	6.5	40.2	44.8	115	95	21
SAPL-R-42 x 48		6.6	8	15550	3.5	4.5	5.5	6.5	42.2	47.8	110	95	26
SAPL-R-45 x 52		8.6	10	28300	3.5	4.5	5.5	6.5	45.2	51.8	105	135	45
SAPL-R-48 x 55		8.6	10	24700	3.5	4.5	5.5	6.5	48.2	54.8	155	130	43
SAPL-R-50 x 57		8.6	10	23600	3.5	4.5	5.5	6.5	50.2	56.8	150	125	45

• Pt(Max. Permissible Thrust Load) indicates values at the zero(0) torque, and Tc(Max. Permissible Torque) at the zero(0) thrust load respectively. In case torque and thrust load occur simultaneously, please refer to the formula in the [Selection guide] page for combined load calculation.
• For the best performance, make sure all foreign substances e.g. corrosion, dust etc. are removed from each surface of shaft, hub, and A.P. Lock’s inner and outer ring.
• W*: Distance(W) between pressure flange and hub/shaft when several pieces of SAPL-R are mounted simultaneously.