Side-clamp
Dimensions / Performance
| Model | CAD | Size (±0.3mm) | Screw | Rated Torque (N·m) |
Max. Torque (N·m) |
Max. rpm (min-1) |
Moment of Inertia (kg·m2) |
Static Torsional Stiffness (N·m/rad) |
Mass (g) |
Permissible Misalignment | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D | L | L1 | F | Size | Fastening Torque (N·m) |
Angular (˚) |
Parallel (mm) |
||||||||
| SCJA-15C |  |
15 | 22.2 | 8 | 3 | M2.6 | 1 | 0.25 | 0.5 | 21,000 | 3.3×10-7 | 220 | 9 | 1.5 | 0.3 |
| SCJB-15C | |
15 | 24.2 | 8 | 3 | M2.6 | 1 | 0.25 | 0.5 | 18,000 | 3.5×10-7 | 200 | 10 | 2 | 0.3 |
| SCJA-20C | |
20 | 23.4 | 7.9 | 2.8 | M2.6 | 1 | 0.5 | 1 | 16,000 | 1.2×10-6 | 350 | 19 | 1.5 | 0.5 |
| SCJB-20C | |
20 | 26.4 | 7.9 | 2.8 | M2.6 | 1 | 0.5 | 1 | 12,000 | 1.3×10-6 | 300 | 20 | 2 | 0.5 |
| SCJA-25C | |
25 | 30.4 | 10.4 | 3.6 | M3 | 1.7 | 1 | 2 | 12,000 | 3.3×10-6 | 800 | 34 | 1.5 | 0.5 |
| SCJB-25C | |
25 | 33.4 | 10.4 | 3.6 | M3 | 1.7 | 1 | 2 | 9,000 | 3.4×10-6 | 700 | 35 | 2 | 0.5 |
| SCJA-32C | |
32 | 39 | 13.5 | 4.4 | M4 | 3.5 | 2 | 4 | 9,000 | 1.1×10-5 | 1,200 | 72 | 1.5 | 0.5 |
| SCJB-32C | |
32 | 43 | 13.5 | 4.4 | M4 | 3.5 | 2 | 4 | 7,000 | 1.2×10-5 | 1,000 | 75 | 2 | 0.5 |
| SCJA-40C | |
40 | 45.6 | 16 | 5.9 | M5 | 8 | 5 | 10 | 7,000 | 3.2×10-5 | 1,900 | 140 | 1.5 | 0.5 |
| SCJB-40C | |
40 | 51 | 16 | 5.9 | M5 | 8 | 5 | 10 | 5,000 | 3.3×10-5 | 1,800 | 145 | 2 | 0.5 |
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft.
Standard Inner Diameter (ID)
| Model | Standard Inner Diameter (d1, d2) (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 4 | 5 | 6 | 6.35 | 8 | 10 | 11 | 12 | 14 | 15 | ||
| SCJ□-15C | ● | ● | ● | |||||||||
| SCJ□-20C | ● | ● | ● | ● | ● | |||||||
| SCJ□-25C | ● | ● | ● | ● | ● | |||||||
| SCJ□-32C | ● | ● | ● | ● | ● | ● | ● | |||||
| SCJ□-40C | ● | ● | ● | ● | ● | ● | ||||||
- The recommended shaft tolerance is h7.
- Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
- Keyway is available. (Optional)