Technical data

Self 2D/3D Drawing Service Guide

  • It allows you to create the drawings yourself according to your specifications with just a few simple clicks saving you the trouble of having to contact us.
  • You can also create the drawings with non-standard requirements e.g. keyway, side-clamp split for couplings, specific length(L) for Connecting shafts.
  • All types of CAD drawings (2D/3D) can be downloaded as well as PDF file format.
  • However, this service is only available for “Coupling” & “Connecting Shaft” line.
The first thing to do Please create your account on CADENAS website. Go to Sign-up page >
  1. Click “Register” and you’ll be linked to a sign-up page in the right-side.
  2. Fill your email address.(It’s recommended that a business email is registered.)
  3. Length of password must be between 6 and 60 characters, containing min. 1 uppercase letter, 1 lowercase letter, 1 digit(number).
  4. Fill all the required fields(*).
  5. Lastly, please read the license agreement and tick its checkboxes before clicking “register”
STEP 1 Select products (Coupling/Connecting Shaft ONLY)
CASE1 : Product Selection for Coupling
  1. STEP 1 Select a coupling type
  2. STEP 2 Select a coupling’s outer diameter (OD) size
  3. STEP 3 Check the max.
    inner diameter
    (ID)
  4. STEP 4 Check
    slip torque
  5. STEP 5 Check
    other points
Click to go to “Selection Guide for Coupling”
CASE2 : Product Selection for Connecting Shaft
  • It is basically the same with Case 1 (Product Selection for Coupling), only adding the very last option of determining Length.
  • The only coupling types which can be made as Connecting shaft are SJC(Jaw) and SHD(High torque Disk)
  1. STEP 1 Select a coupling type
  2. STEP 2 Select a coupling’s outer diameter (OD) size
  3. STEP 3 Check the max.
    inner diameter
    (ID)
  4. STEP 4 Check
    slip torque
  5. STEP 5 Check
    other points
  6. STEP 6 Determine the total length(L)
Click to go to “Selection Guide for Coupling”Click to go to “Guide to determine the length of Connecting Shaft”
STEP 2 Create drawings
CASE1 : Create drawings for Coupling

Example model : SHR-33CW 10K3T3 X 14W

Model
SHR-33C
Specific requirements
[D1: Ø10 + Keyway 3mm + additional Tapped-hole on the keyway] + [D2: Ø14 + Side-clamp Split process]

1Access to the below path and click “CADENAS” symbol next to “SHR-33C” as shown in the below screenshot.

Path: [Products] >> [Coupling] >> [SHR Series] >> [Dimensions/ Performance/ CAD]

2Then, you’ll be linked to the page which you can create drawings. Fill the specific requirements according to the below table.

Mark Description Remark Clamping Methods
SET-SCREW SIDE-CLAMP TAPER-RING
D1(mm) Inner diameter 1
K1 Keyway requested for D1
KB1(mm) Keyway size(width) for D1 It complies to standard keyway width sizes unless there's special requirement in advance.
KT1(mm) Keyway size(height) for D1 It complies to standard keyway height sizes unless there's special requirement in advance.
SP1 Side-clamp Split processed for D1
TAP1 Additional Tapped-hole processed for D1 It complies to standard tapped-hole sizes (Please contact our customer service team if there's special requirement on tapped-holes.) 
D2(mm) Inner diameter 2
K2 Keywa requested for D2
KB2(mm) Keyway size(width) for D2 It complies to standard keyway width sizes unless there's special requirement in advance.
KT2(mm) Keyway size(height) for D2 It complies to standard keyway height sizes unless there's special requirement in advance.
SP2 Side-clamp Split processed for D2
TAP2 Additional Tapped-hole processed for D2 It complies to standard tapped-hole sizes (Please contact our customer service team if there's special requirement on tapped-holes.)

Please refer to the below example screenshot.

Specific Requirements for D1
Bore size: 10mm
Keyway (width:3mm)
Additional tapped-hole processed
Specific Requirements for D2
Bore size: 14mm
Side-clamp Split processed

3Generate the preview image.

Click the “Update preview” button and you'll be able to see the initial look of drawings (2D/3D/Dimension) on the same page even before downloading them.

Click the “Update preview” button and you are able to see the initial look of drawings (2D/3D/Dimension) even before downloading them on the same page.

4Select your desired file formats and other conditions and then proceed to download.

Select your desired file formats and other conditions and then proceed to download.
CASE 2: Create drawings for Connecting Shaft

1Access to the below path and click “CADENAS” symbol next to “SJCL-65□□-GR” as shown in the below screenshot.

Path: [Product] >> [Connecting Shaft] >> [SJCL Series or SHDL Series] >> [Dimensions/ Performance/ CAD]

Access to the below path([Product] >> [Connecting Shaft] >> [SJCL Series or SHDL Series] >> [Dimensions/ Performance/ CAD]) and click “CADENAS” symbol next to “SJCL-65□□-GR”

2Other steps are quite similar to Coupling’s (Case 1), however the remarkable point on this Case 2 is the fact you can determine the specific length for your own drawings.

the remarkable point on this Case 2 is the fact you can determine the specific length for your own drawings.