Products
Coupling

Coupling is a core component that transmits power and motion
from the driving shaft to the driven part while absorbing misalignment
and any possible factors that could reduce efficiency of machines
(e.g. vibration, noise, electric current, etc.)

  • Why Couplings?
  • Installation Guide
  • Selection Guide
  • Customer-friendly Services
  • Environmental Compliance
  • Made-To-Order Process
  • Varieties for Special Environments
  • Balancing Correction

Coupling

Model Type Backlash
free
High
Torque
Torsional
Stiffness
Vibration
Absorption
Misalign
-ment Absorption
Oil
resistant
Electric
Insulation
Applicable Motors Hub
Material
Servo Stepping Encoder General
SHR High performance Rubber High Strength Aluminum Alloy
SHR series is excellent for vibration absorption and
helps to enhance efficiency of application allowing higher gain value on the servo motors.
SD Disk High Strength Aluminum Alloy
Stainless steel (SDSS/SDW□S)
SD series is excellent for absorbing misalignment by plate springs and is widely used on servo/step motors.
SAD Advanced Disk High Strength Aluminum Alloy
SAD Series is more stiff and durable compared to similar sized general disk couplings (SD series)
with the advanced structure in the plate springs. We provide SAD series in small/compact sizes.
SHD High
Torque
Disk
Ultra High Strength Aluminum Alloy
Steel (OD≥126)
SHD Series is designed to transmit high torque by adopting harder material and
the advanced structure in the plate springs. We provide SHD series in mid/large sizes.
SJC Jaw High Strength Aluminum Alloy
Steel (OD≥120)
SJC series is the most excellent coupling for transmitting high torque and is durable for vibration/impact.
SOH Oldham High Strength Aluminum Alloy
Stainless steel (SOHV)
SOH series is excellent for absorption of parallel misalignment and
enables reaction force on the shaft to be reduced. It is simple for self-maintenance.
SRB Radial Beam Ultra High Strength Aluminum Alloy
Stainless steel (SRBS)
SRB series is good for both angular/parallel misalignment absorption however it is relatively less-durable.
SRG Rigid High Strength Aluminum Alloy
Stainless steel (SRGS)
SRG series is excellent to be used at highly-precise applications,
however there is no ability to absorb misalignment on this product.
SCJ Cross Joint High Strength Aluminum Alloy
SCJ series is excellent for absorbing both angular/parallel misalignment, and it minimizes reaction force on the shaft.
SFC Urethane
Flexible
STEEL
SFC series is flexible with Urethane material and is excellent for absorbing misalignment, however it is relatively less-durable.